Panasonic CF-72 Series Reference Manual page 26

Computing on the Road
Enabling Power Conservation
Confirm that Phoenix APM 2.0 for Windows NT
displayed in [Control Panel], this means that the program is installed.) If the program
is not installed, be sure to install it.
(To install the Phoenix APM 2.0 for Windows NT
In [Start] - [Run], input [c:\util\drivers\apm\setup.exe] and then select [OK]. Follow the
on-screen instructions.)
NOTE
Windows NT
® is installed. (If [APM 2.0 for NT] is
®
, execute the following procedure.
The LCD will be powered off.
To resume, press any key.
(On this screen, the condition the power of
the display is off is called "standby".)
The computer will enter the hibernation mode
regardless of the Setup Utility settings.
26