Indoor Unit Installation; Indoor Unit Parts - York YKKE Series Installation Manual

Indoor Unit Installation

Indoor Unit Parts

Safety Precautions
WARNING
Securely install the indoor unit on a structure that
can sustain its weight. If the structure is too weak
the unit may fall causing personal injury, unit and
property damage or death.
Install the indoor unit at a height of more than
2.5m (8') above the floor.
DO NOT install the indoor unit in the bathroom or
laundry room as excessive moisture can short the
unit and corrode the wiring.
Drain pump
(within indoor unit)
Drain pipe
Louver
Display panel
Refrigerant pipe
Air inlet
Front grille
Fig. 4.1
CAUTION
Install the indoor and outdoor units, cables and
wires at least 1m (3.2') from televisions or radios
to prevent static or image distortion. Depending
on the appliances, a 1m (3.2') distance may not be
sufficient.
If the indoor unit is installed on a metal part of the
building, it must be electrically grounded.
4
Air outlet
Page 7