Service Conference - Fortinet FortiVoice 200D Reference Manual

service conference

Use this command to configure conference call settings.
Syntax
config service conference
end
Variable
<name>
admin-pin <string>
description <string>
join-message <name>
music <name>
music-on-hold {enable |
disable}
number <string>
quiet-mode {enable |
disable}
status {enable | disable}
user-join-or-leave
<name>
user-pin <string>
user-privilege <name>
Fortinet Technologies Inc.
edit <name>
set admin-pin <string>
set description <string>
set join-message <name>
set music <name>
set music-on-hold {enable | disable}
set number <string>
set quiet-mode {enable | disable}
set status {enable | disable}
set user-join-or-leave <name>
set user-pin <string>
set user-privilege <name>
Description
Enter a name for the conference call configuration.
Enter the number to be entered by the conference host
to be able to host a conference call.
Enter any notes for this conference call.
Enter the name of the joining message for the
conference call.
Enter the music to play for music on hold.
Enable to play background music that callers hear after
the joining message and leaving message are played.
Enter an extension number that callers can call and
enter the user PIN to join a conference call.
Enable to mute the background sound that callers hear
after the joining message and leaving message are
played.
Enable to activate this conference call.
Enter the name of the message to play when someone
joins or leaves a conference call.
Enter a password for joining the conference call. A
caller needs to dial the conference call number and
enter this password to join the conference call.
Enter the user privilege for this conference call.
Page 76 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
Default
123123
disable
disable
enable
123456