2.2
Operating environment
2.2.2
Interface used for connection
To connect this printing system to the computer, the following interfaces can be used.
USB interface
Use this interface to use this printing system via a USB connection. The USB interface can be connected to
a computer running Windows. A USB cable is required for connection. Use a type A (4 pin, male) or type B
(4 pin, male) USB cable.
Ethernet
Use this interface to use this printing system via a network connection.
It supports 100Base-TX and 10Base-T standards. In addition, TCP/IP (LPD/LPR, IPP) and Web service pro-
tocols are supported.
Connection diagram
The printer cables are connected to each port on this machine.
Left side of the machine
USB port (type B) for USB 2.0
bizhub 306/266
Network connector (10 Base-T/100 Base-TX)
2
2-6