SA-AK570PL / SA-AK570GCP
Step 8 Remove 3 screws from D-Amp P.C.B..
Step 9 Lift up D-Amp P.C.B. as arrow shown.
Step 10 Position Mechanism Unit CR14C according to the
diagram shown.
Step 11 Connect 22P FFC cable at the connector (CN2801) on
Main P.C.B..
Step 12 Connect 11P FFC cable at the connector (CN2802) on
Main P.C.B..
Step 13 Connect 6P FFC cable at connector (CN2815) at Main
P.C.B..
Step 14 Connect 20P FFC cable at connector (CN2804) at
Main P.C.B..
Step 15 Connect 5P wire cable at connector (CN1113) at USB
Connector/Led P.C.B..
Step 16 Attach original cable with extension cable (REXX0683)
(8P cable from H5801 to CN5500).
Step 17 Connect extension cable (REEX0930) (17P cable from
CN5050 to CN5050).
62