Panasonic SA-AK570PL Servise Manual page 20

SA-AK570PL / SA-AK570GCP
7.4.1. Error Code Table (For Deck Mechanism)
Error Code Diagnosis Contents Description of error
H01 Mode SW, plunger
and capstan motor
abnormal
H02 Rec INH SW
abnormal
H03 HALF SW abnormal
F01 Reel pulse abnormal
F02 TPS abnormal
7.4.2. Error Code Table (For CD Mechanism Unit)
Error Code Diagnosis Contents Description of error
LOAD Load operation faulty The load operation cannot
UNLD Unload operation
faulty
UP Exchange open
operation faulty
DOWN Down operation faulty The down operation cannot
OPEN Open operation faulty The open operation cannot
CLOSE Close operation faulty The open operation cannot
MODEL Mode change to
updown operation
faulty
Normal operation during
mecha transition, MODE
SW abnormal is
memorized. The content of
abnormality can be
confirmed in the abnormal
detection mode explained
in the later section.
The content of abnormality
can be confirmed in the
abnormal detection mode
explained in the later
section.
complete when time out -->
Falsaf reverse operates
again then time out again, it
is memorized.
The unload operation
cannot complete when time
out --> Falsaf reverse
operates again then time
out again, it is memorized.
The exchange open
operation cannot complete
when time out --> operation
time out again, it is
memorized.
complete when time out -->
Falsaf reverse operates
again then time out again, it
is memorized.
complete when time out -->
Falsaf reverse operates
again then time out again, it
is memorized.
complete when time out -->
Falsaf reverse operates
again then time out again, it
is memorized.
The mode change to
updown operation cannot
complete when time out
reversing --> operates
again then time out again, it
is memorized. Mode
change to updown.
Automatic FL Display
Automatic FL Display
20
Remarks
For deck mechanism unit.
Press [ ] on main unit for
next error.
For deck mechanism unit.
Press [ ] on main unit for
next error.
For deck mechanism unit.
Press [ ] on main unit for
next error.
For deck mechanism unit.
Press [ ] on main unit for
next error.
For deck mechanism unit.
Press [ ] on main unit for
next error.
Remarks
For CD Mechanism unit (CR14C).
Press [EXCHANGE] on main unit for
next error.
For CD Mechanism unit (CR14C).
Press [EXCHANGE] on main unit for
next error.
For CD Mechanism unit (CR14C).
Press [EXCHANGE] on main unit for
next error.
For CD Mechanism unit (CR14C).
Press [EXCHANGE] on main unit for
next error.
For CD Mechanism unit (CR14C).
Press [EXCHANGE] on main unit for
next error.
For CD Mechanism unit (CR14C).
Press [EXCHANGE] on main unit for
next error.
For CD Mechanism unit (CR14C).
Press [EXCHANGE] on main unit for
next error.