Panasonic SA-AK570PL Servise Manual page 30

SA-AK570PL / SA-AK570GCP
8.8. Disassembly of Rear Panel
• Follow the (Step 1) - (Step 5) of Item 8.4
• Follow the (Step 1) of Item 8.7
Step 1 Remove 9 screws at rear panel (For PL only).
Step 1 Remove 10 screws at rear panel (For GCP only).
Step 2 Slide the Voltage Seclector P.C.B. as arrow shown.
Step 3 Slightly lift up the Mechanism Unit (CR14C) from the 2
locators.
Step 4 Release 2 catch from the side panel.
Step 5 Remove the rear panel.
8.9. Disassembly of Front Panel
Unit
• Follow the (Step 1) - (Step 5) of Item 8.4
• Follow the (Step 7) - (Step 10) of Item 8.5
Step 1 Detach 27P FFC cable at connector (CN2806) at Main
P.C.B..
Step 2 Detach 2P wire cable at connector (CN1112) at Main
P.C.B..
Step 3 Detach 21P FFC cable at connector (CN2011) at Main
P.C.B..
Step 4 Detach 10P FFC cable at connector (CN2807) at Main
P.C.B..
30