Step 6 Remove Jupiter USB P.C.B..
Note : During reassembling procedures, ensure 4 points is
solder onto Jupiter USB P.C.B..
8.7.
Disassembly of Fan Unit
• Follow the (Step 1) - (Step 5) of Item 8.4
Step 1 Detach 2P wire cable at connector (CN2810) at Main
P.C.B..
Step 2 Remove 2P wire cable from the hook.
Step 3 Remove 1 screw at the rear panel.
Step 4 Lift the Fan Unit slightly as arrow shown.
Step 5 Remove the Fan Unit.
Note: During reassembling procedures, ensure wires are
properly dressed in the hook.
29
SA-AK570PL / SA-AK570GCP