Table of Contents
Advertisement
Section 1: Getting Started
...for choosing the J5000 Color Label Printer. The J5000 Printer will print razor-sharp
Thank you...
text and barcodes, vibrant colors, and even stunning photo-realistic photographs
directly onto rolls of labels.
This Operator's Guide is your complete step-by-step guide to quickly and easily set
up and print with your new J5000 Printer.
A: Choosing a Good Location
•
Place the printer on a flat surface in a location with adequate air circulation to
prevent internal heat buildup
•
Do not place the printer near heat sources such as radiators or air ducts, or in a
place subject to direct sun light, excessive dust, mechanical vibration or shock
•
Allow for adequate clearance in front of the printer to accommodate the printed
label stock as it is leaving the printer to avoid the possibility of binding or jamming
of the label stock. Except in the case of individual cut labels, the printer should sit
close to edge of a table so that the printed labels hang from the front of the printer
and fall to the floor or an empty container. This will prevent labels from bunching
up in the front of the printer which can cause print quality issues.
•
Allow for adequate overhead and left side clearance for opening the top cover to
allow easy access to the label stock and ink cartridge
•
Be careful when you close the top cover. (Pinch points exist)
B: Unpacking and Inspection
While unpacking your printer, inspect the carton to ensure that no damage has occurred
during shipping. Make sure that all supplied accessories are included with your unit.
The following items are included in the supply box:
•
Power Adapter
•
Power Cord
•
USB Cable
•
Software Installer CD
•
Cyan, Magenta, Yellow and Black Ink
Setup Cartridges
•
Quick Start Guide
•
Instructions on how to download
Brady Workstation
The following items are inside the printer:
•
Replaceable printhead (Already
installed in the printer)
J5000 Operator's Guide, Rev. 1.53
2
Hide quick links:
Advertisement
Table of Contents
