Brady BradyJet J5000 Operator's Manual page 6

Wireless Technical Specifications
WLAN IEEE 802.11b/g/n connectivity
Radio protocol
RF Operating Frequency
RF Output Power
Antenna Type \ Antenna Gain
13.56MHz RFID
Radio protocol
RF Operating Frequency
RF Output Power
Antenna Type
Wireless Regulatory Information
Regulatory markings, subject to country certification, have been applied signifying
wireless (radio) approvals.
Operation of the device without regulatory approval is illegal.
United States
Note:
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
own expense.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference and, (2)
this device must accept any interference received, including interference that may
cause undesired operation.
J5000 Operator's Guide, Rev. 1.53
WLAN IEEE 802.11b/g/n
2.401 – 2.473 GHz
< +20dBm EIRP (100mW)
PCB PIFA antenna \ 2.2 dBi gain
ISO15693 compliant RFID reader/writer
13.56 MHz
< +23dBm (200mW)
PCB loop antenna, 2.5uH @ 13.56 MHz
v