Group - Panasonic KX-TDA100 Features Manual

2.2 System Configuration—Software
2.2.2

Group

Description
This PBX supports various types of groups.
1.
Trunk Group
Trunks can be grouped into a specified number of trunk groups (e.g., for each carrier, trunk
type, etc.) (
on a trunk group basis. All trunks belonging to a trunk group follow the assignment
determined for that trunk group.
One trunk can belong to only one trunk group on a port or channel basis.
Port basis: LCOT/DID/E & M/ISDN-BRI/ISDN-PRI23/ISDN-PRI30
Channel basis: E1/T1
2.
User Group
The PBX supports user groups (
the following groups:
a)
b)
c)
Every extension must belong to one user group, but cannot belong to more than one user
group.
Assignable Extensions: PT/SLT/PS/ISDN Extension/T1-OPX
[Example]
User Group 1
Extn. 100 Extn. 101
2.1 Call Pickup Group (
Using the Group Call Pickup feature, extensions can answer any calls within a
specified group. One user group can belong to several call pickup groups.
(
[Example]
284 Feature Guide
LCOT/BRI Trunk Group Number [402]). Several settings can be assigned
Tenant ( 2.2.3 Tenant Service)
Call Pickup Group (See below.)
Paging Group (See below.)
User Group 2
Extn. 102 Extn. 103
1.4.1.3 Call Pickup)
Call Pickup Group 1
User Group 1
Extn. 100 Extn. 101 Extn. 102 Extn. 103
User Group [603]), each of which is used to compose
User Group 3
Extn. 104 Extn. 105
User Groups of a Pickup Group [650])
Call Pickup Group 2
User Group 2 User Group 3
Extn. 104 Extn. 105
User Group 4
Extn. 106 Extn. 107
Call Pickup Group 3
User Group 4
Extn. 106 Extn. 107