Panasonic KX-TDA100 Features Manual page 299

Programmer
Code
Installer Level
Programmer
Code
Administrator
Level
Programmer
Code
User Level
Programmer
Code
• Remote Programming Limitation
It is possible to disable remote access through system programming (
Programming [810]).
• If an extension user sets the Walking Extension feature while the extension data (e.g.,
Headset mode) is programmed through PC programming, some extension data for the
user may not be transferred properly.
Installation Manual References
Installation Manual
<KX-TDA100/KX-TDA200>
2.3.1 MPR Card
2.3.3 RMT Card
2.6.6 CTI-LINK Card
3.1 Overview — KX-TDA100/KX-TDA200
3.2 Connection — KX-TDA100/KX-TDA200
3.3 Installation of the KX-TDA Maintenance Console — KX-TDA100/KX-TDA200
<KX-TDA15/KX-TDA30>
6.5.7 RMT Card
7.1 Overview — KX-TDA30
7.2 Connection — KX-TDA30
7.3 Installation of the KX-TDA30 Maintenance Console
Feature Guide References
1.1.1.2 Direct In Line (DIL)
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
3.2 PC Programming
Password
System Password
for Installer
System Password
for Administrator—
for PC Programming
System Password
for User—for PC
Programming
2.3 System Data Control
Description
All system programming is accessible.
Permitted system programming is
accessible. Each system programming can
be determined whether to be accessed by
the administrator.
Permitted system programming is
accessible. Each system programming can
be determined whether to be accessed by
the end users.
Remote
Feature Guide 299