Trunk Access - Panasonic KX-TDA100 Features Manual

1.5 Making Call Features
1.5.5.3

Trunk Access

Description
There are the following features to access a trunk.
Feature
Idle Line
Access (Local
Access)
Trunk Group
Access
S-CO Line
Access
Conditions
• COS programming determines the trunk groups available for making calls (
Number [500]).
• Trunk numbers can be referred on a trunk port basis (
Reference [409]).
• Button Assignment
A flexible button can be customised as a G-CO, L-CO, or S-CO button as follows:
Loop-CO (L-CO)
Group-CO (G-CO)
Single-CO (S-CO)
It is possible to assign trunks in the following ways:
– The same trunk to the S-CO button and to a G-CO button
– The same trunk group to more than one G-CO button
– More than one L-CO button
Dialling the Trunk Access number selects a CO button according to the priority: S-CO
G-CO
• Direct Trunk Access
By pressing an idle CO button, it automatically switches on the hands-free operation mode
and allows a user to use On-hook Dialling. The user need not press the SP-PHONE
button, MONITOR button, or lift the handset.
• Group Hunting Order for Idle Line Access
An idle trunk is selected from the trunk groups assigned for Idle Line Access. If multiple
trunk groups are available, the trunk group hunting sequence can be determined through
system programming.
84 Feature Guide
Description
Selects an idle trunk
automatically from the assigned
trunk groups.
Selects an idle trunk from the
corresponding trunk group.
Selects the desired trunk directly. Dial the S-CO Line Access number and
Type
No parameter (All assigned trunk groups
through system programming are applied.)
A trunk group is assigned.
A specified trunk is assigned.
L-CO
Accessing method
Dial the Idle Line Access number. Or
press a L-CO button.
Dial the Trunk Group Access number
and a trunk group number. Or press a
G-CO button.
the trunk number. Or press the S-CO
button.
LCOT/BRI Trunk Number
Assignable parameter
Trunk Group