Table of Contents
Advertisement
3700 Portable Samplers
Section 3 Programming Guidelines
Figure 3-7 3700 Control Panel
3-14
The individual key switches that make up the keypad provide
tactile and audible feedback to assure you that the key switch
has been successfully actuated. When you press a key switch, you
can feel the deflection of the spring member in the switch; an
audio indicator inside the sampler will beep once. The sampler
has a 10-keystroke buffer which, in some cases, allows you to
"type ahead" of the display.
Control Keys – Control keys let you turn the sampler on or off,
start or resume the currently entered program, and control the
sampler manually. Control key functions are:
•
- Pressing the
ON/OFF
off will turn the sampler on, reactivate the display, and
place the sampler in the standby state. Pressing the
/
key (when the sampler is on) will halt all
ON
OFF
sampling activity and clear the display.
• PUMP FORWARD / PUMP REVERSE - The
and
FORWARD
PUMP REVERSE
or in reverse until you interrupt it with the
While the pump is running, one of the messages shown
below is displayed, depending on the pumping direction.
PUMPING FORWARD . . .
PUMPING REVERSE . . .
/
key when the sampler is
ON
OFF
keys run the pump forward
STOP
PUMP
key.
Advertisement
Table of Contents
