Figure 6-37 Editing The Id # Edit Mode; Figure 6-38 The Message When The Edited Id Is Not In The Database - Olympus 45MG User Manual

DMTA-10022-01EN, Rev. C, January 2015
4. Press [2nd F], [FILE] (ID#) again, and then edit the ID value (see Figure 6-37 on
page 118).
5. Press [MEAS] to return to the measurement screen with the new active ID.
6. When the edited ID is not in the database, the help text bar message shown in
Figure 6-38 on page 119 appears. Select INSERT to insert the new ID in front of
the active ID.
OR
Select APPEND to add the new ID to the end of the file.

Figure 6-38 The message when the edited ID is not in the database

118 Chapter 6

Figure 6-37 Editing the ID # edit mode