Polycom VVX 500 User Manual page 99

• Enable the PIP to display next to full-screen video ('side-by-side mode'), as shown next.
• Enable the PIP to display over full-screen video ('PIP mode'), as shown next.
To change the way the PIP displays:
1 Tap Settings from Home view, and tap Basic > Video > Local Camera View.
2 From the Local Camera View screen, tap, and then adjust the following settings:
○ Local Camera View (Full Screen)—Enables or disables the PIP from displaying when you view
video on the full screen. The default setting is Enabled.
○ Local Camera View Mode (Full Screen)—Sets whether you want the PIP to display over, or next
to, full-screen video. Select one of these settings:
» Side-by-Side—Displays the PIP next to, rather than over, full-screen video.
» PIP—Displays the PIP over full-screen video.
The default setting is Side-by-Side.
Note: How Do I Display Full-Screen Video Without the Black Bars?
If you select PIP, as well as update the way full-screen video displays (by choosing Full or Crop
mode), the full-screen video will display on the entire screen without the black sidebars. To
choose Full or Crop mode, see Changing How Non-PIP Video Displays.
3 Tap Save.
Chapter 3: Using Video and the Polycom VVX Camera
85