Changing How You View All Video Calls; Displaying All Incoming Video Calls On The Full Screen - Polycom VVX 500 User Manual

Polycom® VVX® 500/501 and Polycom® VVX® 600/601 Business Media Phones and Polycom® VVX® Camera User Guide
To change the clarity of your video:
1 Tap Settings from Home view, and tap Basic > Video > Camera Settings.
2 From the Camera Settings screen, tap, and then adjust, the following camera settings:
○ Target Frame Rate—sets how smoothly your video displays. You can set a rate between 5
(least smooth) and 30 (most smooth). The default rate is 25.
○ Brightness Level—sets how bright your video video will be. You can set a level between 0
(dimmest) and 6 (brightest). The default level is 3.
○ Saturation Level—sets how much color your video displays. You can set a level between 0
(lowest) and 6 (highest). The default level is 3.
○ Contrast Level—sets the difference in brightness between the light and dark areas of your
video. You can set a level between 0 (no contrast increase) and Auto (noise reduction contrast).
The default level is 0.
○ Sharpness Level—sets the clarity of detail in your video. You can set a level between 0 (lowest)
and 6 (highest). The default level is 3.
○ Flicker Avoidance—adjusts the flickering (caused by AC power) of your video captured by the
camera sensor. Tap 50 Hz (flicker avoidance for Europe and Asia) or 60 Hz (flicker avoidance for
North America). The default is 50 Hz.
Changing How You View All Video Calls
You can set up your phone so that it handles all video calls in a certain way. You can choose to do the
following:
• Display all incoming video calls on the full screen
• Change the way Non-PIP video displays
• View full-screen video with or without the PIP, and whether to display the PIP next to, or over,
full-screen video
Displaying All Incoming Video Calls on the Full Screen
By default, far-side video always displays in the call window, as shown next.
82