Adjusting Thread Trimmer -900/24; Pre-Calibrating Solenoid Setting / Control Cam - Pfaff 2481-980/30 PLUSLINE Adjustment Manual

15

Adjusting thread trimmer -900/24

.07
15

Pre-calibrating solenoid setting / control cam

.07.01
Rule
1. When the solenoid 3 is completely extended, the roller lever 4 should be at the lowest
point of the control cam.
2. When the needle bar is positioned 1.8 mm after b.d.c. (needle rise position), the roller
lever 4 should engage in the corresponding control cam cutout.
Fig. 15 - 20
O Move the solenoid carrier 1 ( screws 2 ) according to rule 1.
O Turn the control cam 5 ( screws 6 ) according to rule 2.
4
5
6
1
Adjustment
4
3
2
27