Installing A Processor Blank - Dell PowerEdge C4130 Owner's Manual

3. If you are removing a processor permanently, install the processor blank.
Related Links
Safety instructions
Before working inside your system
After working inside your system
Installing a processor
Installing a heat sink
Installing memory modules

Installing a processor blank

Installing a processor blank
If you are converting a dual processor system to a single processor system, install the processor blank.
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Ensure that the memory module socket ejectors are in the unlocked position.
Steps
1. Align the processor blank with the memory module socket on the system board.
2. Lower the processor blank into the memory module socket, and press the blank firmly until the
memory module socket ejectors click into place.
78