Dell PowerEdge C4130 Owner's Manual page 93

Figure 26. Removing and installing a processor
1. close first socket-release lever
3. processor
5. processor shield
7. socket
Next steps
1. Replace the processor(s).
2. Install the heat sink.
3. Install the PCIe Shroud, if replacing processor 1
4. Reinstall the cooling shroud.
5. Follow the procedure listed in the After working inside your system section.
Related Links
Before working inside your system
After working inside your system
Installing a processor
Installing a heat sink
Installing the cooling shroud
Installing the cooling shroud
Installing the PCIe shroud
2. pin-1 indicator of processor
4. slot (4)
6. open first socket-release lever
8. socket keys (4)
93