Fejlfindings Skema; Trouble Shooting - Royal 2608 Instruction Manual

DK
Fejlfindings skema
PROBLEM SKYLDES HJtELPSIDE
Kmckker I. Spolen er ikke korrekt isat. I. Se side 23
undertriiden 2. Undertniden er for stram. 2. Se side 21
3. Spolen er tradet forkert. 3. Se side 23
4. Ocr er st0v
i spolckapsJcn og
4. Se side 73
tr;1dsp~ndingstJederen.
Springer sting
I. Nalcn
er ikke korrekt isat.
I. Se
side 13
fJ\'er 2. Nillen er beskadiget. 2. Se side 13
3. Forkert type nill bliver brugt. 3. Se side 77
4. Trildningen af overtraden er
4.
Se side 15
forkert.
5. Forkert trykfod bliver brugt.
5. Se side 9
Uregelrnressig
I. Forkert nale str. i forhold til I. Se side 77
sting/indforing af stoffet.
stof
2.
Ovcnddssp;endingcn er for
2. Se side 31
los.
3. Forkert undertradssp",nding. 3 . Se side 21
ShIITe(
rynker I. Over-eller undertrilds-
I. Se side 21+31
sp.endingen er for stram.
2. Stingene er for lange til stoffet. 2. Skift stingl","gde
3. Trilden er for tyk.
3. Se side 77
4. Forkert triidning af over og 4.
Se side 15-23
undertraden.
Tnidene slltr I. Overtdiden er ikke tradet
I. Se side 15
knuder korrekt.
2
Spolen er ikke tradet korrekt.
2.
Se side 23
3. Nillitrad forhold er ikke 3.
Se side 77
korrekt.
Kmckkcr I.Nalen er ikke isat korrekl.
I. Se side 13
nvertn'iden
2. Nillen er beskadiget.
2. Seside 13
3.
Naleholderskruen er 10s. 3. Se side 13
4.
Overtradssprendingen er for 4. Se side 31
stram.
5 . Nalen er for tin til stoffet.
5. Se side 77
6. Maskinen er tradet forkert.
6. Se side 15+23
7. Der er hlevet stillet pa knap- 7. Se side 13
pernc. mens naJen har v<eret
nede i stoffet.
Muskinen larmer I.
Symaskincn mangler alie. I. Sm(1r maskinen.
III-!
kurer ujrevnt 2. Tradtrrevler og olie rester har
2. Rens griberlejet.
samlct sig i griber eller pa nale-
3 .
Rens maskinen
stangen. og smor med fin
3. Olie af dilrlig
kvalitet er brugt.
symaskine olie
4 . Nillen er beskadiget. 4.
Skirt nillen
5 .
Stingl;:cngden er indstillet
5 .
Skift stingl",ngdc
forkert til de sting der hruges.
BEMJERK:Gem original emballage.
For sikker forsendelse i forbindelse med
eventuel service eftersyn.
75
GB
Trouble shooting
PROBLEM CAUSE REMEDY
Bobbin thread I. Bobbin not inserted correctly. I. See page 24
breaks 2. Bobbin thread too tight. 2. See page24
3. Bobbin incorrectly wound.
3. See page24
4 . Dust in bobbin case. 4. Remove dust
with nrush
Stitches arc left I. Needle
not properly fitted on
out needle bar. I. See page 13
2. Needle bent. blunt or worn. 2. See page 13
3. Wrong needle type has being
3. See page73
used. 4. See page 16
4.Threading of needle thread is 5. See pagelO
not correct.
5.
Wrong presser foot.
Irregular stitches I.
Needle size nol suited to fabric. I. Use top qualit
threads.
2. Needle thread tension too 2. Check thread
loose.
tension.
3 . Wrong bobbin thread tension.
3. Check hobbin
thread tension
Shring or I. Needle-or bobbin lesion loa
I. Check needle/
puckering of the
tight. bobbin thread
seam
2.
Stitches are too long for the tension regu-
fabric. lalion.
3. Thread too thick. 2.
4. Wrong threading of needle
3.
See "size of
and bobbin thread.
needle,and
thread"
4. Check threadi!
Thread forms
I.
Needle thread not threaded I. Check threadi!
loops correctly.
2.
Bobbin not threaded
2. Check threadi!
correctly.
3. Needle/thread do not 3. See"Size of
correspond
needle and
thread" .
Needle thread I. Needle not inserted correctly.
I. I nsert needle
hreaks 2. Needle damaged. correctly.
3.
Needle screw loose.
2. Replace.
4. Needle thread tension too tight.
3.
Fasten screw
5. Need le too thin for the fabric.
4.
Check tension
6. Wrong threading.
5.
See "size of
7. Bultons have been adjusted, needle and
while the needle have been in thread"
the fabric.
6. Check threadi !
7. Check buttons
Machine does not
I. Machine needs oiling .
I.
Oil the machir
run freely and
2. Dust and thread in shuttle . 2. Clean the
makes a noise 3 . Wrong oil has been used. shuttle.
4 . Needle has been damaged
3. Clean the
5.Stitch length is wrong
machine and (
compared to the selected stitch . with fine sewi
machine oil.
NOTE:Save original container.
For safe transport for service check if
necessary.