Deletion Of Id; Voice Prompt Language Switchover - Panasonic WX-CT420 Operating Instructions Manual

Setting the unit

Deletion of ID

When the Center Module is WX-C3010, delete the ID of this
product according to the following procedure.
This function takes effect only when DIP switch No.4 is at
the ON setting (WX-C3010).
If it is at the OFF setting (WX-CC411, WX-CC412), it
is not necessary for the ID to be deleted manually. The
Center Module will delete it automatically.
Hold down the [POWER] button for 2 seconds
or more to turn off the Belt Pack.
For deleting an ID registered in the Center Module of Lane A
Press the [POWER] button for 1 second or
more while holding down the [F] and [T1]
buttons to turn on the power.
The unit starts in "Delete ID mode". The power
indicator blinks orange.
For deleting an ID registered in the Center Module of Lane B
Press the [POWER] button for 1 second or
more while holding down the [F] and [T2]
buttons to turn on the power.
The unit starts in "Delete ID mode". The power
indicator blinks orange.
Press the [P] button.
The ID is deleted instantly, the voice message "ID not
registered" is heard from the speaker of the headset,
and the power indicator blinks red to indicate an
abnormal state.
If Deletion of ID fails, an error beep and the voice
message "Failed" are heard from the speaker of
the headset, and the power indicator blinks red to
indicate an abnormal state. If that happens, retry
from STEP 1.
Important
When the number of ID registrations of this product or
the All-In-One Headset exceeds the Center Module's
upper limit, the Center Module deletes some IDs
automatically. If a unit of this product or the All-In-One
Headset is not used for an extended time after being
registered, its ID may be deleted.
18
Voice prompt language
switchover
You can change the language used for voice prompt. You
can select one from "English", "French", "Spanish", and "No
voice prompt" as the language for voice prompt.
Hold down the [POWER] button for 2 seconds
or more to turn off the Belt Pack.
Press the [POWER] button for 1 second or
more while holding down the [P] button to turn
on the power.
The power indicator blinks orange and the lane
indicator remains off.
Press the [T1] button to change the language.
When the [T2] button is pressed, the voice
prompt message starts in the language
selected after a beep.
English: "Hello"
French: "Bonjour"
Spanish: "Buenos Dias"
No voice prompt: –
Press the [P] button.
The currently selected language is set, and this
product restarts automatically.