Battery Loading & Replacement; Loading; Replacement - Panasonic WX-CT420 Operating Instructions Manual

Battery loading & replacement
Notes
Refer to operating instructions included with the battery and battery charger.
Be sure to prepare a fully charged battery.
The power indicator of this product turns red, the voice message "Battery Low" is heard from the speaker of the headset,
and then a beep is heard at 5 seconds intervals. It is recommended to replace the battery once this state is reached.

Loading

Install the battery as shown in the figure to the right.
Note
When inserting the battery, make sure that the terminals
are correctly directed.

Replacement

Slide the battery lock as shown in the figure to the right.
Remove the battery.
10
Battery
Terminals
Battery Lock