CS-PA7DKD / CU-PA7DKD / CS-PC7DKD / CU-PC7DKD
Indoor unit piping
Spanner or
wrench
For the left piping
1. Route the indoor tubing with the drain hose to the
hole.
Pull out the drain hose.
Exchange the hose and cap.
Cap
2. Insert the piping and connecting cable to indoor side
through the hole.
Flare Nut Pipings
Torque wrench
Fig.16
Cap
Drain hose
Fig.17
Outdoor
Piping
Indoor Connecting cable
3. Insert the connecting cable into the indoor unit
• Do not connect the cable to the indoor unit.
• Make a small loop with the cable for easy connection.
Connecting cable
42
Fig.18
Gas side piping
Liquid side piping
Fig.19