Mitel 6863i Release Notes page 24

Mitel 6800 Series SIP Phones 4.2.0 SP1 Release Notes
• Phone Numbers: The list of phone numbers/locations the respective user will use to call
the BroadWorks Anywhere portal. The portal will allow users to route calls only if it is
accessed by one of the configured known numbers/locations. These numbers/locations
can be defined and enabled/disabled individually by navigating to the phone number field
and pressing the Edit softkey. By default, 10 numbers/locations can be viewed/configured
on the phone. Administrators can define the number of phone numbers/locations that can
be viewed/configured through the phone's UI by using the "xsi broadworks anywhere
locations" parameter (the range being from 1 to 25).
Note: In scenarios where the BroadWorks call manager has more numbers defined
than the number of locations configured to be displayed on the phone, the phone
will display the configured number of locations starting from the first defined in the
call manager. For example, if the call manager has 25 numbers defined and the
"xsi broadworks anywhere locations" parameters is defined as 10 for the phone,
the first 10 locations defined in the call manager will be displayed on the phone.
When adding or editing the phone numbers/locations, the following settings can be defined:
• Phone Number: A phone number the respective user will use to call the BroadWorks
Anywhere portal.
• Description: A description of the phone number, usually a location or type of number (e.g.
"Home" or "Cell").
• On: Sets whether the number/location should be enabled for the BroadWorks Anywhere
service.
• Alternate Number: An outbound alternate phone number or SIP-URI that when defined
will ring when the SIP phone rings.
• Call Control: When enabled, call control services will be performed by the BroadWorks
Anywhere location.
• Diversion Inhibitor: When enabled, the respective location will be prevented from
redirecting or forwarding incoming calls to another even if call forward is activated.
• Answer Confirmation: When enabled, the BroadWorks call manager will prompt for an
answer confirmation when an incoming call is answered by the respective location.
20