Audiovox Rampage ACC-56 Owner's Manual And Installation Manual page 14

USE OF CONTROLS
LCD DISPLAY
The LCD Display Panel will illuminate when the CD changer is
operating. Different symbols will appear depending on the
function and operation in use. Each functional display is
explained in the following paragraphs.
TRACK/DISC SCAN (SCN)
When the Scan button is pressed, the indication SCN will
appear on the LCD panel and the first 10 seconds of each track
on the disc will be played in order. When a desired track is
reached, press the Scan button again and play of that track will
continue (SCN will disappear from the display). Scan mode will
be cancelled by activating any other function (Repeat, Shuffle,
Disc Select, Track Select, or Track Search).
When the Scan button is pressed and held for longer than 2
seconds, the SCN and DISC indications will appear on the LCD
panel and the first 10 seconds of the first track of each disc in the
magazine will be played. When a desired disc is reached, press
the Scan button again and play of that disc will continue (SCN
and DISC will disappear from the display). Disc Scan mode will
also be cancelled by activating any other function (Repeat,
Shuffle, Disc Select, Track Select, or Track Search).
TRACK/DISC REPEAT (RPT)
When the Repeat button is pressed, the indication RPT will
appear on the LCD panel and play of the selected track will be
continuously repeated until the Repeat mode is cancelled by
pressing the Repeat button again or by activating the Scan 9 or
Shuffle 7 functions.
When the Repeat button is pressed and held longer than 2
seconds, the RPT and DISC indications will appear on the LCD
panel and play of the selected disc will be continually repeated
until the Disc Repeat mode is cancelled by pressing the Repeat
button again or by activating the Scan 9 or Shuffle 7 functions.
TRACK/DISC SHUFFLE (SHF)
When the Shuffle button is pressed, the indication SHF will
appear on the LCD panel and the tracks on the disc will be
played in a random, shuffled order. The Track Skip 5 function
will also select tracks in the shuffled order instead of the normal
progression. The Track Shuffle mode can be cancelled by
pressing the Shuffle again, or by activating the Scan 9 or Repeat
8 functions.
When the Shuffle button is pressed and held longer than 2
seconds, the SHF and DISC indications will appear on the LCD
panel and the discs in the magazine will be played in a random
shuffled order, as well as the tracks on each disc. When all the
tracks on the selected disc have been played, the next disc will
be selected in shuffled order and its tracks will be played in
shuffled order. The Disc Shuffle mode can be cancelled by
pressing the Shuffle button again, or by activating the Scan 9 or
Repeat 8 functions.
RESET BUTTON
A reset button is located on the front panel of the remote control
which must be activated with a pen or other thin object as it is
recessed to prevent accidental engagement. The reset circuitry
14
is provided to protect the unit's microprocessor and laser
pickup system and should only be activated under the
following circumstances:
1. Initial installation after all wiring is completed (this must be
done).
2. If abnormal disc operation is encountered, the reset button
may be pressed to clear the system and return to normal
operation.
IMPORTANT: Use of the Reset button on the CD Changer
will cause the CD magazine to be automatically ejected.
Make certain changer door is fully opened prior to using
Reset.
PLAY/PAUSE ( /
Pressing this button turns on the CD changer, illuminates the
LCD panel and begins play of disc #1 if a new CD magazine
has been loaded into the changer. If a magazine was already
in the changer, play will resume from the track on the disc
previously in play. Play of the disc is shown by the indication
and the rotating disc symbol on the LCD panel. Pressing
the button again will temporarily stop play of the disc. The
pause indication will appear on the LCD panel and the disc
symbol will stop rotating and flash instead. Press the button
again to resume play of the disc.
NOTE: If left in the PAUSE mode for 5 minutes, the unit will
automatically shut off.
POWER OFF SWITCH (OFF)
Press this switch to turn the CD changer off and return to
normal FM reception.
TRACK SELECT (
The Track Select function is used to quickly access the
beginning of a particular track. Press Forward Track Select
( ) or Backward Track Select (
track as shown by the track number indication on the LCD
panel.
TRACK SEARCH (
High-speed audible search to any section of the disc can be
made by the search functions. Press and hold the
to advance quickly in the forward direction or press and hold
the button to advance rapidly in the backward direction.
During search operation, the rotation disc symbol will turn
faster and the appropriate symbol
LCD panel. When the forward search
and end of the last track is reached, or the backward search
is held down and the unit reaches the beginning of the
first track on the disc, the unit will enter the Pause mode until
the button is released.
DISC +/- SELECT BUTTON
Press the DISC select button to select the desired disc for
play as shown on the LCD panel. The unit will automatically
load the selected disc and begin play. To advance to a
higher number disc, press the + side of the button. To
return to a lower number, press the - side.
) BUTTON
)
) to locate the desired
)
or will flash on the
button is held down
button