Special performance series cd changer interface for toyota 1998 avalon; toyota 1999 avalon; toyota 1998 camry; toyota 1999 camry; toyota 1998 celica; toyota 1999 celica; toyota 1998 corolla; toyota 1999 corolla; toyota 1998 land cruiser; toyota 1999 land (2 pages)
HINTS FOR CORRECT AND SAFE OPERATION The CDC-825 is designed to be operated only on 12 volt DC negative ground systems. The unit can not be used on 24 volt or positive ground systems. TEMPERATURE The unit may not operate correctly in extremely hot or cold temperatures.
HANDLING THE DISCS Dirt, dust, scratches and warpage cause sound skips during playback and a deterioration of sound quality. To take proper care of your discs: 1. Use compact discs that have the mark shown on the right. 2. Fingerprints and dust should be carefully wiped off the disc's signal surface (glossy side) with a soft cloth.
Such damage will not be covered by the Warranty on this product. Additional CD magazines are available as accessory item CDC-7C from your SPS/Audiovox dealer, or you may contact us directly at: Attention: SPS Division Audiovox Corporation 150 Marcus Blvd.
Page 5
LOADING THE MAGAZINE INTO THE CHANGER Completely slide the door on the changer to the right as shown in Figure 4. Making sure the top of the magazine is facing upward, gently insert it into the unit until it clicks into place, as shown in Figure 5.
CD CHANGER OPERATING INSTRUCTIONS The CDC-825 10-disc changer is designed to operate through the FM stereo section of your automotive sound system and therefore the adjustment of volume, balance, tone and other audio adjustments are made by using the controls on the car stereo. Control of disc play is by the control unit of the CDC-825 which can be conveniently mounted to the dashboard.
POWER OFF SWITCH (OFF) Press this switch to turn the CD changer off and return to normal FM reception. DISC SELECT ( - +) Press this disc select button to select the desired disc for play as shown on the LCD panel. The unit will automatically load the selected disc and begin play.
of that disc will continue ("SCAN" and "DISC" will disappear from the display). Disc Scan mode will also be cancelled by activating any other function (Repeat, Shuffle, Disc Select, Track Skip, or Track Search). REMOTE SENSOR The sensor for the infrared signal from the optional wireless remote control is located behind this lens.
WIRELESS REMOTE CONTROL The CDC-10R Wireless Remote Control (optional) is capable of operating all functions of the wired control unit. Each button on the remote control functions in the same way as the comparable button on the wired control unit. For optimal operation of the remote control, always aim it toward the Remote Sensor on the control unit.
Page 10
INFRARED SENDER The wireless signal from the remote control is sent from this lens. For optimal range and performance of the remote control, always aim the Sender at the Remote Sensor on the wired control unit. Do not let your finger interfere with the signal and make sure the lens does not become blocked by dirt, dust, etc.
TROUBLESHOOTING An error made in operation or during installation of this product may be mistaken for a system malfunction. Please perform the checks described below before contacting your dealer or service facility. Symptom Possible Cause Blown fuse No power Incorrect connection Magazine is inserted in wrong Magazine cannot be installed...
Changers AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 36 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor.