Loading For Non-Peel Mode - Paxar TC6039OH Operator's Handbook Manual

7. Hold the backing paper edge between the feed and pinch rollers, and
press the trigger.
Close the cover.
8.
Tap Load Supply from the printer icon menu, then Calibrate.
9.

Loading for Non-Peel Mode

To load supplies for non-peel mode:
1. Feed the supply under the applicator roller and over the label
deflector.
Close the supply cover.
2.
Tap Load Supply from the printer icon menu, then Calibrate.
3.
Guide Roller
(behind suppl y)
Feed Roller
(behind Pinch Roller)
Pinch Roller
Ap plicator Roller
Label Deflector
Using Supplies 3-5