Table of Contents
Advertisement
Error Codes
This section lists common error codes and what they mean.
Code(s)
Description
004 - 005
Supply size is incorrect. Reload the correct supplies.
267 – 271
Communication error. See your System Administrator.
410 - 413
703 - 704
Supply Error. Load supplies or make sure they are loaded
correctly. See "Loading Supplies" in Chapter 3 for more
information.
750
Printhead is overheated. Turn off the printer to let it cool.
751 - 753
The printer sensed a problem with a mark on the supplies.
Check the supplies to see if they are loaded correctly.
756
The printer is out of supplies. Load supplies. See "Loading
Supplies" in Chapter 3 for more information.
757
The calibrated supply length differs by plus or minus .25
inches from the format. Load supplies.
758
Check supply. Either the supply is not seen, or the on-
demand sensor is broken (purchase optional). Check for a
label jam. Clear the supply path or reload supplies. The
printer does not recalibrate after this error.
762
Low battery. Recharge the battery. See "Charging the Main
Battery" in Chapter 2 for more information.
763
Waiting to dispense label. Press Enter.
768
Printhead error. See your System Administrator.
790 - 791
The printer is busy or has an error pending. Turn off the
printer, wait two seconds, and then turn it back on.
904 – 911
System error. See your System Administrator.
SYSTEM
System error. See your System Administrator.
ERROR
VECTOR ##
T e c h n i c a l S u p p o r t
If these solutions do not work or you have a problem or error code not
listed, see your System Administrator or call Service at the number listed
on the back of this manual.
6-4 Operator's Handbook
Advertisement
Table of Contents
