Paxar Monarch Pathfinder Ultra Gold User Manual page 105

Font Color
Line field
not
blocked
out by
trans-
parent
field
using
attribute
O
Line
field
blocked
out by
opaque
field
using
attribute
B
Justification
Character Rotation
Depending on your printer's configuration, enter the color of
the selected font. For more information about your printer's
configuration, see Chapter 3, "Configuring the Printer."
Solid black print should not exceed 30% on a given square
inch of the label, or printhead life may be decreased. There
are two types of field color overlay attributes:
Transparent
Opaque
Field placement is an important consideration when using field
color attributes. If a line field is defined before the overlay
(text or constant text) field, the line field is blocked out by the
overlay field, depending on the overlay field's color attribute.
If a line field is defined after the overlay field, the line field is
not blocked out by the overlay field, regardless of the overlay
field's color attribute.
Choices include Black Opaque, White Opaque, Black
Transparent and White Transparent.
Alignment of the text within the field. Choices include Left (L),
Right (E), and Center (B). Fonts 1012 and 1013 (Letter
Gothic 6.5 and 9 pt) default to L (left), regardless of selection.
Depending on your printer's configuration, enter the
character rotation of the selected field. For more
information about your printer's configuration, see Chapter
3, "Configuring the Printer." Choices include Top of Field,
Left of Field, Bottom of Field, and Right of Field.
The field or supply does not rotate, only the characters do.
See "ABCD" in the example below.
The overlay field (text or constant text) does
not block out or "erase" existing fields.
The overlay field blocks out or "erases"
existing fields.
Defining Special Fields 9-5