Check Digit Errors (300 - 324) - Paxar Monarch DOS-based Pathfinder Ultra System 6035 User Manual

258 Supply position is outside the range.
259 Contrast adjustment must be -28 to 11.
260 Print adjustment must be -99 to 99.
261 Margin adjustment must be -99 to 99.
262 Speed adjustment must be 0 (1.0 IPS).
263 Primary monetary symbol is invalid.
Secondary symbol selection must be 0 (none) or 1 (print secondary
264
sign).
265 Monetary decimal places must be 0 to 3.
272 Internal code page selection must be 1 (ASCII).
273 Cut adjustment must be -99 to 99 dots.
282 RS232 Trailer string is too long. Use a maximum of 3 characters.
283 ENQ Trailer string is too long. Use a maximum of 3 characters.
284 The buffer type must be T (Transmit), R (Receive), I (Image), F
(Format), or D (Downloadable Fonts).
285 The storage device type in the memory configuration packet must be
R (volatile RAM).
286 The buffer size is invalid.
287 The printhead width must be 1.83 inches.
288 The battery voltage must be 1 (12-volt battery).
The printer address specified in the communication settings packet
289
must use exactly six characters.

Check Digit Errors (300 - 324)

310 Check digit scheme number must be 1 to 10.
311 Modulus must be 2 to 11.
Troubleshooting 12-7