Periodic maintenance and adjustment
ing the battery, connect the
positive lead before connecting
the negative lead.
4. After installation, make sure that
1
the battery leads are properly con-
nected to the battery terminals.
2
NOTICE
Always keep the battery charged.
Storing a discharged battery can
3
cause permanent battery damage.
4
5
6
7
8
9
10
11
12
13
14
[ECA21910]
ECA16531
7-29
Replacing the fuses
The main fuse box and the fuse box,
which contains the fuses for the individ-
ual circuits, are located under panel B.
(See page 7-7.)
If a fuse is blown, replace it as follows.
1. Turn the vehicle power off.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
For XP500
1
3
2
1. Main fuse
2. Spare main fuse
3. Main fuse box cover
EAU54025
[EWA15132]