Yamaha Tmax XP500 2016 Owner's Manual page 71

Periodic maintenance and adjustment
1. Floorboard mat
4. Remove the coolant reservoir cov-
er by removing the screw.
1. Coolant reservoir cover
2. Screw
5. Remove the coolant reservoir cap,
add coolant to the maximum level
mark, and then install the reservoir
cap. WARNING! Remove only
the coolant reservoir cap. Never
attempt to remove the radiator
cap when
NOTICE: If coolant is
hot.
[EWA15162]
not available, use distilled water
or soft tap water instead. Do not
use hard water or salt water
since it is harmful to the engine.
If water has been used instead
of coolant, replace it with cool-
ant as soon as possible, other-
wise the cooling system will not
be protected against frost and
1
1
2
the engine is
corrosion. If water has been
added to the coolant, have a
Yamaha dealer check the anti-
freeze content of the coolant as
soon as possible, otherwise the
effectiveness of the coolant will
be reduced.
1. Coolant reservoir cap
Coolant reservoir capacity (up to the
maximum level mark):
0.27 L (0.29 US qt, 0.24 Imp.qt)
6. Install the coolant reservoir cover
by installing the screw.
7. Place the left floorboard mat in the
original position and push it down-
ward to secure it.
7-14
[ECA10473]
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14