9400 Series Operator's Handbook
Defining the Supply Type
The printer contains a sensor to detect the supply. You must
tell the printer the type of supply you're using; die cut or black
mark/aperture. This screen also allows you to recalibrate the
printer if the format should become misaligned as you are
printing batches.
Aperture
(through supply)
E
1. From the main menu select Printer Options and press
. You'll see
D
2. Press
E
. You'll see
5-8
Select Printer Option
Use Batch Separators
until you see Define Supply Type, then press
Select Supply Type: B
A)lign, B)lack Mark or D)ie Cut
Black Mark
(on back of supply)