Epson STYLUS PRO 5000 Setup Manual page 88

10. Click Printer and Option Information. You will see the
Printer and Option Information dialog box (the actual
dialog box you see may vary slightly from the one below).
11. Confirm that the Installed Memory box shows the correct
amount of memory installed. If the box is dimmed or does
not show the correct amount of memory, click the Settings
Sheet button to print a Settings Sheet similar to the
example shown below. If the amount of SIMM memory
printed on the sheet does not match the amount shown in
the Installed Memory box, select the correct memory size in
the Installed Memory list, and click OK.
12. Click OK to exit the printer driver.
Note:
Any time you change memory, always verify that this setting changes
accordingly.
Installing Options and Memory Modules
4
4-13