Epson STYLUS PRO 5000 Setup Manual page 66

5. Fan a stack of paper; then tap it on a flat surface to even the
edges.
6. Load the stack of paper with the printable surface down and
the right edge of the paper resting against the right side of
the paper tray. Make sure the stack lies flat on the bottom
of the tray.
Note:
Load paper in the paper tray short edge first. Only a few
kinds of paper can be loaded long edge first.
The paper tray can hold up to 250 sheets of 17-lb. or 64g/m
plain paper. Do not load paper above the arrow mark on the
inside surface of the right edge guide. For information on the
loadable capacity of EPSON special paper, see your
Reference Guide.
Starting to Print
3
2
3-5