3. Connect the other end of the interface cable to either the
modem port or printer port on the Macintosh. The ports are
marked with the following icons. (Some Macintosh Power
Book models have only one serial port.)
modem port
Note:
If your Macintosh has a built-in modem, connect the interface
cable to the printer port.
4. Turn on the printer by pressing the
5. Turn on your Macintosh.
See the next page for instructions on installing the printer
software. You must install the printer software before using
your printer.
Using an optional EPSON interface card
An optional LocalTalk™ or Ethernet interface card lets you use
your printer on an AppleTalk network.
To use the LocalTalk Interface Card (C82312 ), you will need
two LocalTalk Locking Connector Kits (DIN-8 version). Attach
a connector box to the AppleTalk interface on the printer and
to the printer port on the Macintosh. Then attach the LocalTalk
cable between the two connector boxes. See the user's guide
that comes with the connector kits for more details.
To use the Type B Ethernet Interface Card (C82357 ), see the
user's guide that comes with the card for setup information.
printer port
2
Operate button.
Getting Started
2
2-25