Seat Adjustment; Standard Seat; Quick Adjust Seat - MTD 13AM762F765 Operator's Manual

brakeis in need of adiustment,The brakedisc can be
foundon the rightsideof the transmissionin the rearof
the tractor,Adiustif necessaryas follows:
1, Lookingat thetransmissionfrom the rightside of the
tractor,locatethe compression springand brakedisc,
See Figure16,
2, Loosen,but do NOTremove,the hex nutfoundon the
rightsideof the brakeassembly,See Figure16,
3, Usinga feelergauge,set the gap betweenthebrake
disc and the brakepuck at ,011",
4, Re=tighten the hexnut loosenedearlier,
Seat Adjustment
_lj ARNING: Before operating this
machine, make sure the seat is
engaged in the seat stop, stand
behind the machine and pull back
on seat until fully engaged into
stop.
Standard Seat
Toadiust the positionof the seat,loosenthe two hex
screwson the bottomof the seat,Slide the seatforward
or backwardas desired,Retightenthe two screws,See
Figure17,
Knob Adjustment Seat (if so equipped)
Toadiust the positionof the seaton modelsso equipped,
loosenthe two knobs on the bottomof the seat, See
Figure18, Slidethe seat forwardor backwardas desired,
Retightenthe two knobs,
Quick Adjust Seat (mr s o equipped)
Toadiust the positionof the seaton modelsequipped
with a seat adiustmentlever,movetheseat adiustment
lever(locatedunder theseat) to the left and slidethe seat
forwardor rearward,See Figure19,Makesureseat is
locked intopositionbeforeoperatingthe tractor,
f
Set gap .011
Figure 16
Hex Nut
Figure 17
machine, make sure
the seat is engaged in ,I
the seat stop, stand }
behind the machine ;
and pull back on seat }
until fully engaged into i
stop.
zJ-•'•• ." ZY
Figure 19 Figure 18
21