Starting A Programme Without The Delay Start; Behaviour Of The Appliance; Starting A Programme With The Delay Start; Cancelling The Delay Start - John Lewis jlwm1413 User Manual

Starting a programme without
the delay start
Press button Start/Pause to start the programme.
The relevant indicator stops to flash and stays
on.
On the display the indicator of the phase is
operation starts to flash.
The programme starts, the door is locked. The
display show the indicator
The drain pump can operate for a
short time when the appliance fills
water.

Behaviour of the appliance

After approximately 15 minutes
from the start of the programme:
• The appliance adjusts
automatically the cycle time to the
laundry you have put in the drum
to have perfect washing results in
the minimum necessary time.
• The display shows the new time
value.
Starting a programme with
the delay start
1. Press button Delay start again and again until
the display shows the number of minutes or
hours of delay.
The related indicator comes on.
2. Press button Start/Pause.
The appliance starts the countdown of the delay
start.
When the countdown is completed, the
programme starts automatically.
Before you press button Start/
Pause to start the appliance, you
can cancel or change the set of the
delay start.

Cancelling the delay start

To cancel the delay start:
22
.
1. Press button Start/Pause to set the appliance
to pause.
The related indicator flashes.
2. Press button Delay start repeatedly until the
display shows .
3. Press button Start/Pause again to start the
programme immediately.
Interrupting a programme and
changing a function
You can change only some options before they
operate.
1. Press button Start/Pause.
The related indicator flashes.
2. Change the function set.
3. Press the button Start/Pause again.
The programme continues.

Cancelling a programme

1. Press button On/Off to cancel the programme
and to deactivate the appliance.
2. Press button On/Off again to activate the
appliance.
Now, you can set a new washing programme.
Before starting the new
programme the appliance drains
the water. Make sure that the
detergent is still in the detergent
compartment, if not fill the
detergent again.

Opening the door

If the temperature and level of the
water in the drum are too high and
the drum still rotates you cannot
open the door.
While a programme or the delay start operates,
the appliance door is locked.
1. Press button Start/Pause.
In the display the related door lock indicator
goes off.
2. Open the appliance door.
3. Close the door and press button Start/Pause.
Washing Machine User Manual