Check The Position Of The Flap; Setting A Programme - John Lewis jlwm1413 User Manual

Compartment for liquid additives (fabric
conditioner, starch).
Maximum level for quantity of liquid
additives.
Flap for powder or liquid detergent.
Always obey the instructions that
you find on the packaging of the
detergent products.

Check the position of the flap

1. Pull out the detergent dispenser until it stops.
2. Press the lever down to remove the dispenser.
3. To use powder detergent, turn the flap up.
Washing Machine User Manual
1
2
A
4. To use liquid detergent, turn the flap down.
B
With the flap in the position
DOWN:
• Do not use gelatinous or
thick liquid detergents.
• Do not put more liquid
detergent than the limit
showed in the flap.
• Do not set the prewash
phase.
• Do not set the delay start
function.
5. Measure out the detergent and the fabric
conditioner.
6. Carefully close the detergent dispenser.
Make sure that the flap does not cause a
blockage when you close the drawer.

Setting a programme

1. Turn the programme knob and set the
programme:
• The related programme indicator comes
on.
• The indicator of Start/Pause flashes.
• The display shows: the default
temperature, the spin speed, the indicators
of the programme phases and the
programme duration.
2. If necessary, change the temperature, the spin
speed, the cycle duration, or add available
options. When you activate an option, the
indicator of the set option comes on.
If you set something incorrect, the
display shows the message Err.
21