Enter Point Type; Enter Paragraph Type - Adobe Photoshop CS6 User Manual

words to your image.
Paragraph type uses boundaries to control the flow of characters, either horizontally or vertically. Entering text this way is useful when you
want to create one or more paragraphs, such as for a brochure.
Type entered as point type (top) and in a bounding box (bottom)
Type on a path flows along the edge of an open or a closed path. When you enter text horizontally, characters appear along the path
perpendicular to the baseline. When you enter text vertically, characters appear along the path parallel to the baseline. In either case, the
text flows in the direction in which points were added to the path.
If you enter more text that can fit within a paragraph boundary or along a path, a small box or circle containing a plus symbol (+) appears in
place of a handle in the corner of the boundary or anchor point at the end of the path.
Clicking in an image with a type tool puts the type tool in edit mode. When the tool is in edit mode, you can enter and edit characters as well as
perform some other commands from the various menus; however, certain operations require that you first commit changes to the type layer. To
determine whether a type tool is in edit mode, look in the options bar—if you see the Commit button
in edit mode.

Enter point type

When you enter point type, each line of type is independent—the line expands or shrinks as you edit it, but it doesn't wrap to the next line. The
type you enter appears in a new type layer.
1. Select the Horizontal Type tool
2. Click in the image to set an insertion point for the type. The small line through the I-beam marks the baseline of the type (the imaginary line
on which type rests). For vertical type, the baseline marks the center axis of the characters.
3. Select additional type options in the options bar, Character panel, or Paragraph panel.
4. Enter the characters. To begin a new line, press Enter (Windows) or Return (Mac OS).
Note: You can also transform point type while in edit mode. Hold down the Ctrl (Windows) or Command (Mac OS) key. A bounding box
appears around the type. You can grab a handle to scale or skew the type. You can also rotate the bounding box.
5. When you finish entering or editing the type, do one of the following:
Click the Commit button
Press the Enter key on the numeric keypad.
Press Ctrl+Enter (Windows) or Command+Return (Mac OS).
Select any tool in the toolbox; click in the Layers, Channels, Paths, Actions, History, or Styles panel; or select any available menu
command.

Enter paragraph type

When you enter paragraph type, the lines of type wrap to fit the dimensions of the bounding box. You can enter multiple paragraphs and select a
paragraph justification option.
You can resize the bounding box, causing the type to reflow within the adjusted rectangle. You can adjust the bounding box while you enter type or
after you create the type layer. You can also use the bounding box to rotate, scale, and skew type.
1. Select the Horizontal Type tool
2. Do one of the following:
Drag diagonally to define a bounding box for the type.
Hold down Alt (Windows) or Option (Mac OS) as you click or drag to display the Paragraph Text Size dialog box. Enter values for Width
or the Vertical Type tool
in the options bar.
or the Vertical Type tool
.
.
and the Cancel button , the type tool is
To the top
To the top