Displaying And Maintaining An Ethernet Interface - HP 3100 Series Configuration Manual

Step
Enable the interface to log
7.
storm control threshold
events.

Displaying and maintaining an Ethernet interface

Task
Display Ethernet interface
information.
Display traffic statistics for the
specified interfaces.
Display traffic rate statistics
over the last sampling interval.
Display information about a
manual port group or all
manual port groups.
Display information about the
loopback function.
Display information about
storm control.
Clear the interface statistics.
Command
storm-constrain enable log
Command
display interface [ interface-type ] brief [ down |
description ] [ | { begin | exclude | include }
regular-expression ]
display interface interface-type interface-number [ brief
[ description ] ] [ | { begin | exclude | include }
regular-expression ]
display counters { inbound | outbound } interface
[ interface-type ] [ | { begin | exclude | include }
regular-expression ]
display counters rate { inbound | outbound }
interface [ interface-type ] [ | { begin | exclude |
include } regular-expression ]
display port-group manual [ all | name
port-group-name ] [ | { begin | exclude | include }
regular-expression ]
display loopback-detection [ | { begin | exclude |
include } regular-expression ]
display storm-constrain [ broadcast | multicast |
unicast ] [ interface interface-type interface-number ] [ |
{ begin | exclude | include } regular-expression ]
reset counters interface [ interface-type
[ interface-number ] ]
14
Remarks
Optional.
By default, the interface outputs
log messages when monitored
traffic exceeds the upper
threshold or drops below the
lower threshold from the upper
threshold.
Remarks
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
user view