Configuration Procedure - HP 3100 Series Configuration Manual

Configuration procedure

To configure static MAC-based VLAN assignment:
Step
Enter system view.
1.
Associate a specific
2.
MAC address with a
VLAN.
Enter interface view or
3.
port group view.
Configure the link type of
4.
the ports as hybrid.
Configure the hybrid
5.
ports to permit packets
from specific
MAC-based VLANs to
pass through.
Enable the MAC-based
6.
VLAN feature.
To configure dynamic MAC-based VLAN:
Step
Enter system view.
1.
Enter interface view or port
2.
group view.
Configure the link type of the
3.
ports as hybrid.
Configure the hybrid ports to
4.
permit packets from specific
MAC-based VLANs to pass
through.
Enable the MAC-based
5.
VLAN feature.
Configure
6.
802.1X/MAC/portal
authentication or any
combination.
Command
system-view
mac-vlan mac-address
mac-address vlan vlan-id
[ priority priority ]
•
Enter Layer 2 Ethernet
interface view:
interface
interface-type
interface-number
•
Enter port group view:
port-group manual
port-group-name
port link-type hybrid
port hybrid vlan vlan-list
{ tagged | untagged }
mac-vlan enable
Command
system-view
•
Enter Layer 2
Ethernet interface
view:
interface
interface-type
interface-number
•
Enter port group
view:
port-group manual
port-group-name
port link-type hybrid
port hybrid vlan vlan-list
{ tagged | untagged }
mac-vlan enable
For more information, see
Security Command
Reference.
115
Remarks
N/A
N/A
Use either command.
•
The configuration made in Ethernet
interface view applies only to the port.
•
The configuration made in port group
view applies to all ports in the port
group.
By default, all ports are access ports.
By default, a hybrid port only permits the
packets from VLAN 1 to pass through.
Disabled by default.
Remarks
N/A
Use either command.
•
The configuration made in Ethernet
interface view applies only to the
port.
•
The configuration made in port
group view applies to all ports in the
port group.
By default, all ports are access ports.
By default, a hybrid port only permits the
packets of VLAN 1 to pass through.
Disabled by default.
N/A