Configuring A Downlink Policy; Configuring The Customer-Side Port; Configuring The Network-Side Port - HP 3100 Series Configuration Manual

Step
Associate the class with the
7.
behavior to map the CVLAN
to the SVLAN.

Configuring a downlink policy

To configure a downlink policy to map SVLANs back to CVLANs:
Step
Enter system view.
1.
Configure a class for an SVLAN.
2.
Return to system view.
3.
Configure a behavior for a CVLAN.
4.
Return to system view.
5.
Create a QoS policy and enter QoS
6.
policy view.
Associate the class with the behavior to
7.
map the SVLAN to the CVLAN.

Configuring the customer-side port

Step
Enter system view.
1.
Enter Layer 2 Ethernet
2.
interface view.
Configure the port as a trunk
3.
port.
Assign the port to CVLANs
4.
and SVLANs.
Apply the uplink policy to the
5.
incoming traffic.
Apply the downlink policy to
6.
the outgoing traffic.

Configuring the network-side port

Command
classifier tcl-name behavior behavior-name
Command
system-view
a. Create a class and enter class view:
traffic classifier tcl-name [ operator { and | or } ]
b. Configure an SVLAN as the match criterion:
if-match service-vlan-id vlan-id
quit
a. Create a traffic behavior and enter traffic behavior
view:
traffic behavior behavior-name
b. Configure a CVLAN marking action:
remark customer-vlan-id vlan-id
quit
qos policy policy-name
classifier tcl-name behavior behavior-name
Command
system-view
interface interface-type
interface-number
port link-type trunk
port trunk permit vlan
{ vlan-id-list | all }
qos apply policy policy-name
inbound
qos apply policy policy-name
outbound
169
Remarks
N/A
N/A
The default link type of an
Ethernet port is access.
By default, a trunk port belongs to
VLAN 1 only.
N/A
N/A