Configuration Restrictions And Guidelines; Configuration Procedure; Displaying And Maintaining Mvrp; Configuration Example For Mvrp In Normal Registration Mode - HP 3100 Series Configuration Manual

Configuration restrictions and guidelines

•
MVRP with GVRP compatibility enabled can work together with STP or RSTP, but cannot work
together with MSTP. When MVRP with GVRP compatibility enabled works with MSTP, the
network might operate improperly.
•
When GVRP compatibility is enabled for MVRP, Hewlett Packard Enterprise recommends
disabling the Period timer. Otherwise, the VLAN status might frequently change when the
system is busy.

Configuration procedure

To enable GVRP compatibility:
Step
Enter system view
1.
Enable GVRP
2.
compatibility

Displaying and maintaining MVRP

Task
Display the MVRP status
of the specified port and
each MVRP interface in
the specified VLAN.
Display the MVRP
running status.
Display the MVRP
statistics.
Display the dynamic
VLAN operation
information of the
specified port.
Clear the MVRP statistics
of the specified ports.
Configuration example for MVRP in normal
registration mode

Network requirements

As shown in
the other VLANs to MSTI 0.
Command
system-view
mvrp gvrp-compliance
enable
Command
display mvrp state interface
interface-type interface-number vlan
vlan-id [ | { begin | exclude | include }
regular-expression ]
display mvrp running-status [ interface
interface-list ] [ | { begin | exclude |
include } regular-expression ]
display mvrp statistics [ interface
interface-list ] [ | { begin | exclude |
include } regular-expression ]
display mvrp vlan-operation interface
interface-type interface-number [ | { begin
| exclude | include } regular-expression ]
reset mvrp statistics [ interface
interface-list ]
Figure 69, configure MSTP, map VLAN 10 to MSTI 1, map VLAN 20 MST 2, and map
Remarks
N/A
By default, GVRP compatibility is disabled.
199
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view