HP 3100 Series Configuration Manual page 186

Field
FCS
•
SNAP-encapsulated LLDP frame format
Figure 64 SNAP-encapsulated LLDP frame format
Table 22 Fields in a SNAP-encapsulated LLDP frame
Field
Destination MAC address
Source MAC address
Type
Data
FCS
LLDPDUs
LLDP uses LLDPDUs to exchange information. An LLDPDU contains multiple TLVs. Each TLV
carries a type of device information, as shown in
Figure 65 LLDPDU encapsulation format
An LLDPDU can carry up to 28 types of TLVs. Mandatory TLVs include Chassis ID TLV, Port ID TLV,
Time to Live TLV, and End of LLDPDU TLV. Other TLVs are optional.
TLVs
A TLV is an information element that contains the type, length, and value fields.
LLDPDU TLVs include the following categories:
•
Basic management TLVs
•
Organizationally (IEEE 802.1 and IEEE 802.3) specific TLVs
•
LLDP-MED (media endpoint discovery) TLVs
Basic management TLVs are essential to device management.
Description
Frame check sequence, a 32-bit CRC value used to determine the validity of
the received Ethernet frame.
Description
MAC address to which the LLDP frame is advertised. It is fixed at
0x0180-C200-000E, a multicast MAC address.
MAC address of the sending port.
SNAP type for the upper layer protocol. It is 0xAAAA-0300-0000-88CC for
LLDP.
LLDPDU.
Frame check sequence, a 32-bit CRC value used to determine the validity of
the received Ethernet frame.
Figure
177
65.