Troubleshooting For Voice Recognition; Returning To Previous Operation - Mazda CX-3 Owner's Manual

Troubleshooting for Voice Recognition

If you do not understand an operation
method while in the voice recognition
mode, say "Tutorial" or "Help".
Commands useable anytime during
voice recognition
"Go Back" and "Cancel" are commands
which can be used at anytime during voice
recognition.

Returning to previous operation

To return to the previous operation, say,
"Go Back" while in voice recognition
mode.
Cancel
To put the Bluetooth
in standby mode, say, "Cancel" while in
voice recognition mode.
To prevent a deterioration in the voice
recognition rate and voice quality, the
following points should be observed:
The voice recognition cannot be
performed while voice guidance or
the beep sound is operating. Wait
until the voice guidance or the beep
sound is fi nished before saying your
commands.
Phone related commands are available
only when your phone is connected via
®
Bluetooth . Make sure your phone is
connected via Bluetooth
operate phone related voice commands.
Music play commands, such as Play
Artist and Play Album can be used only
in USB audio mode.
Do not speak too slowly or loudly (no
loud voice).
Speak clearly, without pausing between
words or numbers.
®
Hands-Free system
®
before you
Dialects or different wording other
than hands-free prompts cannot be
recognised by voice recognition. Speak
in the wording specifi ed by the voice
commands.
It is not necessary to face the
microphone or approach it. Speak the
voice commands while maintaining a
safe driving position.
Close the windows and/or the sunroof
to reduce loud noises from outside
the vehicle, or turn down the airfl ow
of the air-conditioning system while
®
Bluetooth Hands-Free is being used.
Make sure the vents are not directing air
up towards the microphone.
NOTE
If the voice recognition performance is
not satisfactory.
Refer to Troubleshooting on page 5-143 .
Interior Features
®
Bluetooth
5–111