Laser Sensor (Front) - Mazda CX-3 Owner's Manual

When Driving
i-ACTIVSENSE
Your vehicle is equipped with a laser sensor (front). The laser sensor (front) is positioned
near the rearview mirror and used by the following systems.
Smart Brake Support (SBS)
Smart City Brake Support (SCBS)

Laser sensor (front)

Heed the following precautions to assure correct operation of the system.
Keep the windscreen clean at all times.
Do not apply stickers to the surface of the windscreen (including transparent stickers).
If cracks or damage caused by fl ying gravel or debris is visible near the laser sensor
(front), stop using the system immediately and have your vehicle inspected by an
Authorised Mazda Repairer.
See the next page on how to turn off the system. Refer to Personalisation Features on
page 9-13 .
Do not apply a coating agent to the windscreen.
When replacing the windscreen wipers or windscreen, consult an Authorised Mazda
Repairer.
Never remove the sensor.
A removed sensor will not meet the conditions for a class 1M laser under the IEC
60825-1 specifi cation and therefore eye safety cannot be assured.
Do not peer into the sensor using optical instruments with a magnifi cation function
such as magnifying glasses, and microscopic and objective lenses within a distance of
100 mm (3.94 in) from the sensor.
4–154
*Some models.
Laser Sensor (Front)
CAUTION
*