Inspecting The Emergency Flat Tyre Repair Kit - Mazda CX-3 Owner's Manual

If Trouble Arises
Flat Tyre
CAUTION
If the tyre infl ation pressure falls
below 130 kPa (1.3 kgf/cm
18.9 psi), repair cannot be done with
the repair kit. Park the vehicle on
a level surface off the right-of-way
and contact an expert repairer, we
recommend an Authorised Mazda
Repairer.
If the tyre infl ation pressure
continues to remain low after
repeating steps 15 to 21, park
the vehicle on a level surface off
the right-of-way and contact an
expert repairer, we recommend an
Authorised Mazda Repairer.
NOTE
When checking the tyre infl ation
pressure with the tyre pressure gauge
on the compressor unit, make sure the
compressor switch is turned off.
22. If the tyre infl ation pressure remains
stable, the tyre repair is complete.
Drive the vehicle with care to an expert
repairer, we recommend an Authorised
Mazda Repairer to have the tyre
replaced.
7–16
2
or bar,
Inspect the emergency fl at tyre repair kit at
regular intervals.
CAUTION
A tyre that has been temporarily
repaired with the tyre sealant cannot
be reused. Mazda recommends
replacing the tyre with a new one.
The wheel can be reused after any
sealant adhering to it is wiped off and
carefully inspected. However, replace
the tyre valve with a new one.
Inspecting the Emergency Flat
Tyre Repair Kit
Check the tyre sealant period of
effective use.
Check the operation of the tyre
compressor.
NOTE
The tyre sealant has a period of effective
use. Check the period of effective use
indicated on the bottle label and do not
use it if it has expired. Have the tyre
sealant replaced at an Authorised Mazda
Repairer before the period of effective
use has expired.