Turning The System On/Off - Mazda CX-3 Owner's Manual

NOTE
When the system is temporarily cancelled by depressing the accelerator pedal fully, the
adjustable speed limiter display shows the cancel display. If the vehicle speed exceeds the
set speed by about 3 km/h (2 mph) or more while the cancel display is displayed, the set
speed display fl ashes but the warning sound is not operated.

Turning the System On/Off

Press the speed limiter switch to turn the system on. The adjustable speed limiter display is
displayed.
To turn the system off, press the speed limiter switch while the adjustable speed limiter is
displayed. The adjustable speed limiter display turns off.
Setting the System
Always verify the safety of the surrounding area when setting the adjustable speed
limiter:
If the speed is set lower than the current vehicle speed, the vehicle speed is decreased to
the set speed. Verify the safety of the surrounding area and keep a safe distance between
vehicles ahead and behind you.
1. Press the speed limiter switch to turn the system on.
2. Press the SET
(20 mph) or more, the speed is set to the current vehicle speed. When the current vehicle
speed is less than 30 km/h (20 mph), the speed is set to 30 km/h (20 mph).
3. To increase the set speed, press the SET
adjusted in 10 km/h (5 mph) increments. The set speed can also be adjusted in about 1
km/h (1 mph) increments by pressing the SET
speed increases about 4 km/h (4 mph) by pressing the SET
4. To decrease the set speed, press the SET
adjusted in 10 km/h (5 mph) decrements. The set speed can also be adjusted in about 1
km/h (1 mph) increments by pressing the SET
speed decreases about 4 km/h (4 mph) by pressing the SET
or SET to set the speed. When the current vehicle speed is 30 km/h
WARNING
switch continuously. The set speed can be
switch momentary. For example, the set
switch continuously. The set speed can be
switch momentary. For example, the set
When Driving
i-ACTIVSENSE
switch 4 times.
switch 4 times.
4–137